QuickGrip Cup Holder

QuickGrip Cup Holder for Rivian R1S & R1T

The OpenSourceEV QuickGrip Cup Holder is the simplest way to add a drink holder to your Rivian. A single clip and a grip clamp that keeps a bottle upright at floor level. No tools. Snaps on in seconds. Designed by Todd Stansell, manufactured and sold by OpenSourceEV, and tested in Rivian vehicles.

What Makes This Different

• $9.95 Introductory Price: The cheapest way into our cup holder line.
• Tool-Free Install: Snaps on by hand in seconds. No tools, no adhesives, no modifications to your Rivian.
• Pop Off and Stow: Removes by hand and tucks into the door pocket when you don't need it.
• Two Clamp Sizes: Standard (79mm) holds standard water bottles and insulated tumblers. Large (92mm) holds 40oz bottles and handled mugs.
• Cross-Compatible Parts: Uses the same clamp as our BeverageStation line and the same attachment mechanism and locking pins as our Aux Cup Holder Kit. Parts carry over if you add on later.
• Open Source Design: Design files are publicly available for personal use and remix.

Front Console (Passenger) -- R1S & R1T

• Available Now: Works in any R1S or R1T.
• Installation: Clips onto the passenger-side front console storage area. Angle up approximately 45 degrees, hook the back onto the console trim edge, then lower into place. (see GIF showing install)
• Use Case: Keeps a water bottle upright on the passenger floor. Perfect spot for a long drive.
• Note: Moving the passenger seat far enough forward can contact the holder -- adjust seat position as needed.

R1S 2nd Row Seat Bar -- R1S Only

• Available Now: R1S only. Does not fit the R1T.
• Installation: Snaps onto the adjustment bar underneath the second row seats -- the metal bar you never think about.
• Use Case: Holds a water bottle between your legs on the floor for rear seat passengers. The second row of a Rivian is short on drink storage -- this fixes that.
• Swivels Away: Rotates out of the way when you don't need it without removing it.
• Install Multiple: Add more than one if you've got a full back seat.

R1T Rear Seat -- Coming Soon

• Launching Soon: A new R1T-specific version is on the way. Mounts low in the rear seat area and uses a clamp to hold a water bottle in place.
• Follow for Launch: Sign up for our newsletter or check back soon for availability.

Clamp Sizes

• Standard (79mm): Designed to hold most common drink sizes such as 20oz plastic bottles, most fast-food drinks, and 20-ish oz vacuum insulated cups.
• Large (92mm): Designed for common 40oz water bottles and mugs. This size fits the recently introduced Stanley insulated beverage holder and most wider bottles.

Each version flexes and has a cutout down the side so you can insert beverage holders that have a handle on them. Before purchasing, we strongly recommend measuring the beverages you're most likely to drink from.

If You Need More

• More Drinks Up Front: The BeverageStation Mini holds two drinks and the full BeverageStation holds three. All three products use the same clamp design -- clamps are interchangeable and available as individual replacements.
• Door-Mounted Cup Holders: The Aux Cup Holder Kit mounts to your doors and door pockets.
• Behind the Front Seats: The Seat Back Attachment System adds a cup holder behind the front seats.

Installation

1. Install the clip at your chosen location per the instructions above.
2. Slide the clamp onto the clip until it seats.
3. Insert the retaining pin to lock the clamp in place (optional).
4. To remove, reverse the process. Store in the door pocket when not in use.

Credits

This product is based on the Rivian Cup Holder Clips designed by Todd Stansell and sold by permission of the original author. The original design is available for free download on Printables.