{"title":"Rivian R2","description":null,"products":[{"product_id":"hitch-cover-thumbscrew-v2-pair","title":"Hitch Cover Thumbscrew V2 (Pair)","description":"\u003cp\u003eThe \u003cstrong\u003eOpenSourceEV Parts Hitch Cover Thumbscrew V2 (Pair)\u003c\/strong\u003e fits the Rivian R2 and all R1S and R1T. The Rivian hitch cover is great when you are not towing, but the factory screws require a screwdriver to remove every time. These thumbscrews, with no modifications, let you remove the cover panel by hand, with no tools. They are effectively large thumbscrews that install as a direct replacement for the stock screws.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free cover removal:\u003c\/strong\u003e Take the hitch cover off by hand every time you need it, no screwdriver required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e Installs in place of the stock screws. The only tool needed is the one to remove the hitch cover the first time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStill locks like the original:\u003c\/strong\u003e Like the stock screws, the thumbscrews still need to be turned to lock the cover into place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne vehicle per pack:\u003c\/strong\u003e Includes two thumbscrews, enough for one vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits R2 and all R1:\u003c\/strong\u003e Works with the Rivian R2 and all R1S and R1T model years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Reuse the stock plastic washer from the stock plastic screw. Install each thumbscrew as a direct replacement for the stock screw, with the washer in the same spot. The cover will not retain properly without the washer.\u003c\/p\u003e\n\u003cp\u003eThis product is purchased from a third party, so we are unable to publish an open-source design for it. It is injection molded rather than 3D printed, because the torsional load of this application calls for it.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":43598384201885,"sku":"HCT","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/products\/IMG_1470.jpg?v=1688668586"},{"product_id":"cup-holder-expander-v2","title":"Slim Cup Holder Expander for R2 and R1","description":"\u003cp\u003eThe OpenSourceEV Parts \u003cstrong\u003eSlim Stowable Cup Holder Expander V2\u003c\/strong\u003e for the Rivian R1S, R1T, and R2 is the easiest, most functional way to hold oversized beverages in your vehicle. It adapts the stock 3.2\" cupholder to a 3.66\" cupholder, fitting common containers such as the Nalgene 32oz and 40oz and the Hydro Flask 32oz and 40oz bottles.\u003c\/p\u003e\n\u003cp\u003eWhat makes it better than more general products that do the same thing is a Rivian-specific feature: its slimmed-down sides. Because it is thoughtfully shaved down, it stores easily in a door pocket when not in use, in both the front and rear doors. The slim profile also lets two sit side by side in both the front and rear cupholders, and lets bottles seat without deflection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlimmer for storage:\u003c\/strong\u003e Version 2 shaves the sides down further so the R1S and R1T door pockets close more fully when the expander is stored.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore durable:\u003c\/strong\u003e An overhauled construction model makes V2 stronger than before.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower cost:\u003c\/strong\u003e V2 is less expensive than the previous version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure hold:\u003c\/strong\u003e Two oversized supports hold bottles secure left to right and front to back, at angles nearing 90 degrees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt from ASA:\u003c\/strong\u003e Constructed from ASA for durability and UV resistance to handle real sun and heat inside your vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBottles not included. Priced each.\u003c\/p\u003e\n\u003cp\u003eThis product is a significantly reworked version of the \"Car Cup Holder Bottle Adapter\" created by @roblpetty on Printables, located \u003ca href=\"https:\/\/www.printables.com\/model\/273343-car-cup-holder-bottle-adapter-nalgene-yeti-rambler\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":45121094844573,"sku":"CHE V2","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_2200.jpg?v=1713810759"},{"product_id":"hitch-receiver-storage-box-v2","title":"Hitch Receiver Storage Box V2.5","description":"\u003cp\u003eThe \u003cstrong\u003eOpenSourceEV Parts Hitch Receiver Storage Box V2.5\u003c\/strong\u003e is a snap-in storage solution that fits directly inside the towing hitch receiver on your Rivian R2, R1S, or R1T. Designed, manufactured, and supported by OpenSourceEV, tested in Rivian vehicles, and built to hold up on real-world trips. Sits completely hidden under the OEM hitch cover when not in use.\u003c\/p\u003e\n\u003cp\u003eUnlike gear rattling around your frunk or bed, this keeps small essentials -- cash, cards, a spare key, a multi-tool, or a small flashlight -- right at the hitch and completely out of sight. Slides in, snaps into place, and disappears under the cover.\u003c\/p\u003e\n\u003ch3\u003eWhat Makes This Different\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap-In Retention:\u003c\/strong\u003e Reinforced side clips snap the box securely into the hitch receiver without bolts, straps, or adhesives. Press gently on the clips, slide in, and it locks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide-Top Lid:\u003c\/strong\u003e Redesigned lid stays closed when you need it closed and stops at the groove when open so it does not fall off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cover Compatible:\u003c\/strong\u003e Fits cleanly under the factory Rivian hitch cover. Completely hidden when the cover is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStronger Build:\u003c\/strong\u003e V2.5 adds reinforced side panels and an overhauled clip system versus V2.0 -- stronger, smoother, and more structurally sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Source Design:\u003c\/strong\u003e Design files are publicly available under Creative Commons NC-SA 4.0 for personal use and remix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eReinforced side walls and clip system in V2.5 for improved durability.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eSnaps into the hitch receiver without tools, bolts, or adhesives.\u003c\/li\u003e\n\u003cli\u003eFits under the OEM Rivian hitch cover with no modification.\u003c\/li\u003e\n\u003cli\u003eSlide-top lid with retention groove -- stays open or closed as intended.\u003c\/li\u003e\n\u003cli\u003ePrinted from ASA for UV resistance and heat resilience.\u003c\/li\u003e\n\u003cli\u003eManufactured, sold, and warranty-supported by OpenSourceEV Parts. Made in the USA.\u003c\/li\u003e\n\u003cli\u003eFits Rivian R2, R1S, and R1T.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cp\u003ePick up the Hitch Cover Thumbscrew V2 (Pair) at the same time and get a discount on the bundle. The thumbscrews replace the factory screws on the Rivian hitch cover, so you can remove it tool-free every time you access the box.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eLoad items into the box and slide the cover closed.\u003c\/li\u003e\n\u003cli\u003ePress gently on the side clips and slide the box into the hitch receiver until it snaps into place.\u003c\/li\u003e\n\u003cli\u003eThe box will be fully seated and secure. Remove by pressing the clips and sliding out.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":45943692230813,"sku":"HitchBoxV2","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_2726.jpg?v=1726165938"},{"product_id":"rangefinder-key-fob-surround-r2","title":"Rangefinder Key Fob Surround for R2 + R1 Gen2","description":"\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eRangefinder Key Fob Surround\u003c\/strong\u003e for the Rivian R2 and the Gen 2 Rivian R1S and R1T is a durable, colorful, beautiful, way to improve your key fob. The R2 and Gen 2 R1 use the same fob, so this surround fits both.\u003c\/p\u003e\n\u003cp\u003eThe OpenSourceEV Rangefinder Key Fob Surround installs in under 5 minutes and replaces the metal carabiner part of the key fob with a strong, light-weight ASA bit. It drops the weight of the key fob by over half (24 Grams), makes it over 2 CM shorter, and 5 MM narrower. It adds a reliable keychain hook.\u003c\/p\u003e\n\u003cp\u003eAll of that is great, but it's called \"Rangefinder\" for a reason. In our testing with the Gen 1 unit, the locking function from the key fob increases from ~295ft to ~385ft -- an increase of nearly 25%. Turns out that removing decorative metal from in front of an antenna helps!\u003c\/p\u003e\n\u003cp\u003eWith this item, your key fob is more pocketable, and more functional, and is available in multiple colors:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMidnight Stealth (Black)\u003c\/li\u003e\n\u003cli\u003eGalaxy Black (Black with a slight sparkle)\u003c\/li\u003e\n\u003cli\u003eRJ (Bright Blue)\u003c\/li\u003e\n\u003cli\u003eNot Compass (Yellow)\u003c\/li\u003e\n\u003cli\u003eLA Limestone (Light Grey Silver)\u003c\/li\u003e\n\u003cli\u003eEl Capitano (Dark Grey)\u003c\/li\u003e\n\u003cli\u003eGlacier Iceburg (White)\u003c\/li\u003e\n\u003cli\u003eCanyonero (Red)\u003c\/li\u003e\n\u003cli\u003eLaunch Forrest (Dark Green)\u003c\/li\u003e\n\u003cli\u003eDollar Tree (Sparkly Green)\u003c\/li\u003e\n\u003cli\u003ePerfect Pink (Bright Pink)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore colors are on the way, and a carbon fiber option is coming soon.\u003c\/p\u003e\n\u003cp\u003eA few items to note:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis fits both the R2 keyfob and the older Gen 2 fobs - the fob shown is used for demonstration and is not included with this product.\u003c\/li\u003e\n\u003cli\u003eYou'll need a T5 Torx bit to remove 4 tiny screws from inside of the key fob.\u003c\/li\u003e\n\u003cli\u003eWhile the photos posted are not retouched at all, we believe that coloring is a bit oversaturated. This makes them appear brighter in photos than in reality. The red, for instance, is a bit deeper and darker.\u003c\/li\u003e\n\u003cli\u003eThis is a 3D printed product. It might have very slight ridges on the outside which will gradually wear down with continued use.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OpenSourceEV","offers":[{"title":"Midnight Stealth","offer_id":46430017192093,"sku":"RF-MS","price":7.95,"currency_code":"USD","in_stock":true},{"title":"Galaxy Black","offer_id":46431463833757,"sku":null,"price":7.95,"currency_code":"USD","in_stock":true},{"title":"RJ (Bright Blue)","offer_id":46430017224861,"sku":"RF-RJ","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Not Compass","offer_id":46430017257629,"sku":"RF-CO","price":9.95,"currency_code":"USD","in_stock":true},{"title":"LA Limestone","offer_id":46430017290397,"sku":"RF-LA","price":9.95,"currency_code":"USD","in_stock":true},{"title":"El Capitano","offer_id":46430017323165,"sku":"RF-EL","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Glacier Iceburg","offer_id":46430017355933,"sku":"RF-GI","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Canyonero","offer_id":46430017388701,"sku":"RF-CA","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Launch Forrest","offer_id":46430017421469,"sku":"RF-LF","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Dollar Tree","offer_id":46430017454237,"sku":"RF-DT","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Perfect Pink","offer_id":46431463866525,"sku":null,"price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/690F9464-49B3-4BBB-B2BD-C44633B848F0.jpg?v=1738024473"},{"product_id":"seat-back-attachment-system","title":"Seat Back Attachment System for R2 and R1","description":"\u003cp\u003eThe \u003cstrong\u003eOpenSourceEV Parts Seat Back Attachment System\u003c\/strong\u003e for the Rivian R2, R1S, and R1T is a modular, multi-function mounting platform for the back of your front seat headrest. Designed by Todd Stansell, manufactured and supported by OpenSourceEV, tested in Rivian vehicles, and built to handle real-world road trips.\u003c\/p\u003e\n\u003cp\u003eUnlike single-purpose mounts that only hold a tablet, this system lets you choose what rides behind your seat. Snap on a tablet holder for rear-seat movie time, a MagSafe phone mount to game, FaceTime, or scroll, a hook for dry cleaning or grocery bags, or a cup holder for drinks your second row passengers actually need. Swap between them in seconds with no tools required.\u003c\/p\u003e\n\u003ch3\u003eWhat Makes This Different\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular by Design:\u003c\/strong\u003e One base clip. Multiple slide-on attachments. Buy what you need now; add more later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Everything:\u003c\/strong\u003e The headrest clip snaps on, and every attachment slides on and off without disconnecting the base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17mm Ball Mount:\u003c\/strong\u003e Industry-standard mount point. Available as a solo ball (bring your own holder if you already have one) or paired with the OpenSourceEV Tablet Holder (up to 11\" screens) or the LISEN Offset MagSafe Holder. Optional 12\" braided charging cable add-on in USB-C (60W) or MFi-certified Lightning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCup Holder Option:\u003c\/strong\u003e Available in Standard and Large sizes. Standard (79mm top \/ 71mm bottom \/ 89mm tall) fits cans, 20oz plastic bottles, most fast-food cups, and 20oz insulated bottles. Large (92mm \/ 102mm tall) fits 40oz water bottles and mugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Attachment:\u003c\/strong\u003e Sturdy enough for dry cleaning, bags, or a purse. Slides on the same way as every other attachment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Source Design:\u003c\/strong\u003e Design files are publicly available under Creative Commons NC-SA 4.0 for personal use and remix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAvailable Configurations\u003c\/h3\u003e\n\u003cp\u003eThis is a single kit product. The base headrest clip is always included. You can choose to add any combination of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e17mm Ball Mount Only (bring your own holder -- reuse an existing 17mm-compatible tablet or phone holder you already own)\u003c\/li\u003e\n\u003cli\u003eTablet Holder (with 17mm ball mount, fits screens up to 11\")\u003c\/li\u003e\n\u003cli\u003eMagSafe Phone Holder (with 17mm ball mount, LISEN 17mm Offset, works with MagSafe\/Qi2 cases and included ring)\u003c\/li\u003e\n\u003cli\u003eHook Attachment\u003c\/li\u003e\n\u003cli\u003eCup Holder (Standard or Large)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTypical configurations: Base + 17mm Ball Only (BYOH), Base + Tablet Holder, Base + MagSafe + Hook, Base + Cup Holder + Hook, or build your own combination.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSnaps onto the headrest hook on the back of either front seat. No tools, no bolts, no adhesives, even during assembly.\u003c\/li\u003e\n\u003cli\u003eCompact, low-profile design sits flush against the headrest hook without contacting seat trim.\u003c\/li\u003e\n\u003cli\u003eOptional 12\" braided charging cable add-on in USB-C (60W) or MFi-certified Lightning. Validated to work with tablets and phones, to clear the cutouts, and to provide excellent strain relief and durability.\u003c\/li\u003e\n\u003cli\u003ePrinted from ASA for superior UV resistance and heat resilience inside your vehicle.\u003c\/li\u003e\n\u003cli\u003eDesigned by Todd Stansell. Manufactured, sold, and warranty-supported by OpenSourceEV Parts.\u003c\/li\u003e\n\u003cli\u003eFits all Rivian R2, R1S, and R1T model years (Gen 1 and Gen 2).\u003c\/li\u003e\n\u003cli\u003eMade in the USA. 3D printed in Pittsburgh, PA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"384\" height=\"216\" src=\"https:\/\/www.youtube.com\/embed\/QS5ZGPTNR5E?si=fiIwwOcF4JMt3lIl\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"OpenSource EV Parts","offers":[{"title":"17MM Ball (BYOH) \/ No Hook \/ No Cup Holder","offer_id":47736013127837,"sku":"SBAS-1","price":13.95,"currency_code":"USD","in_stock":true},{"title":"17MM Ball (BYOH) \/ No Hook \/ Standard Cup Holder","offer_id":47736013160605,"sku":"SBAS-2","price":20.95,"currency_code":"USD","in_stock":true},{"title":"17MM Ball (BYOH) \/ No Hook \/ Large Cup Holder","offer_id":47736013193373,"sku":"SBAS-3","price":20.95,"currency_code":"USD","in_stock":true},{"title":"17MM Ball (BYOH) \/ Include Hook \/ No Cup Holder","offer_id":47736013226141,"sku":"SBAS-4","price":15.95,"currency_code":"USD","in_stock":true},{"title":"17MM Ball (BYOH) \/ Include Hook \/ Standard Cup Holder","offer_id":47736013258909,"sku":"SBAS-5","price":22.95,"currency_code":"USD","in_stock":true},{"title":"17MM Ball (BYOH) \/ Include Hook \/ Large Cup Holder","offer_id":47736013291677,"sku":"SBAS-6","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Tablet Holder \/ No Hook \/ No Cup Holder","offer_id":47736013324445,"sku":"SBAS-7","price":23.95,"currency_code":"USD","in_stock":true},{"title":"Tablet Holder \/ No Hook \/ Standard Cup Holder","offer_id":47736013357213,"sku":"SBAS-8","price":30.95,"currency_code":"USD","in_stock":true},{"title":"Tablet Holder \/ No Hook \/ Large Cup Holder","offer_id":47736013389981,"sku":"SBAS-9","price":30.95,"currency_code":"USD","in_stock":true},{"title":"Tablet Holder \/ Include Hook \/ No Cup Holder","offer_id":47736013422749,"sku":"SBAS-10","price":25.95,"currency_code":"USD","in_stock":true},{"title":"Tablet Holder \/ Include Hook \/ Standard Cup Holder","offer_id":47736013455517,"sku":"SBAS-11","price":32.95,"currency_code":"USD","in_stock":true},{"title":"Tablet Holder \/ Include Hook \/ Large Cup Holder","offer_id":47736013488285,"sku":"SBAS-12","price":32.95,"currency_code":"USD","in_stock":true},{"title":"MagSafe Holder \/ No Hook \/ No Cup Holder","offer_id":47736013521053,"sku":"SBAS-13","price":25.95,"currency_code":"USD","in_stock":true},{"title":"MagSafe Holder \/ No Hook \/ Standard Cup Holder","offer_id":47736013553821,"sku":"SBAS-14","price":31.95,"currency_code":"USD","in_stock":true},{"title":"MagSafe Holder \/ No Hook \/ Large Cup Holder","offer_id":47736013586589,"sku":"SBAS-15","price":31.95,"currency_code":"USD","in_stock":true},{"title":"MagSafe Holder \/ Include Hook \/ No Cup Holder","offer_id":47736013619357,"sku":"SBAS-16","price":27.95,"currency_code":"USD","in_stock":true},{"title":"MagSafe Holder \/ Include Hook \/ Standard Cup Holder","offer_id":47736013652125,"sku":"SBAS-17","price":32.95,"currency_code":"USD","in_stock":true},{"title":"MagSafe Holder \/ Include Hook \/ Large Cup Holder","offer_id":47736013684893,"sku":"SBAS-18","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_4312.jpg?v=1773945226"},{"product_id":"overhead-glasses-holder-r2","title":"Overhead Glasses Holder for R2","description":"\u003ch2\u003eOverhead Glasses Holder for R2\u003c\/h2\u003e\n\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eOverhead Glasses Holder\u003c\/strong\u003e gives your glasses or sunglasses a dedicated spot in the Rivian R2, right overhead and within easy reach. No more tossing them in a cupholder, clipping them to a visor, or digging through the console. Just tuck them in when you don't need them and grab them when you do.\u003c\/p\u003e\n\u003ch3\u003eWhy the Glasses Holder\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Nearly Any Frame:\u003c\/strong\u003e Holds nearly any pair of glasses or sunglasses securely against the headliner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight Where You Reach:\u003c\/strong\u003e Mounts at the overhead button panel above the windshield, so your glasses are always one quick reach away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStays Out of the Way:\u003c\/strong\u003e Sits flush overhead and doesn't block your view or get in the way until you need it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatches Your Interior:\u003c\/strong\u003e A textured finish matches the R2's interior plastics and resists fingerprints. Available in Crater (black) or \u003cem\u003e\u003cspan style=\"color: rgb(84, 168, 0);\"\u003e\u003cstrong\u003eNEW\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e Coast (white), which blends in with the lighter headliner in the Coastal Cloud interior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Tools, No Damage:\u003c\/strong\u003e Installs by hand into an existing gap between the overhead panel and the headliner. No adhesives, no drilling, no modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Car Interiors:\u003c\/strong\u003e 3D printed from ASA, a plastic designed to resist sun fading and heat. We print every one ourselves in Pittsburgh, PA, and back it with a 1-year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OpenSourceEV","offers":[{"title":"Crater","offer_id":48941617479837,"sku":"OHG_R2_B","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Coast","offer_id":52998297190680,"sku":"OHG_R2_W","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/CorrectedWhiteandBlack3D-PrintedParts.png?v=1792780424"},{"product_id":"beveragestation-for-r2","title":"BeverageStation for R2","description":"\u003cp\u003eThe OpenSourceEV\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eBeverageStation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor the Rivian R2 is the best to store drinks in your vehicle. It holds \u003cspan style=\"text-decoration: underline;\"\u003eTHREE\u003c\/span\u003e beverages of your choice within easy reach. You can additionally use it as a divider of the open center console storage area when not in use. It also is an unobtrusive and is easy to install in under 60 seconds.\u003c\/p\u003e\n\u003cp\u003eThe product is shown fully configured with three clamps. The blue bottle is installed in a large sized clamp. All clamps are removable and lockable should you not want to remove them. \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis larger BeverageStation stretches over the front of the lower center console opening. There is a small clip that installs on both sides of the open part of the center console and a mounting bar that slides in and connects the two. This allows for storage of up to \u003cspan style=\"text-decoration: underline;\"\u003ethree\u003c\/span\u003e beverages of your choice - one in the passenger footwell, and two in the front most part of the open center console area. The mounting location is customizable so it will not impact with operation of the lower drawer or Camp Speaker.\u003c\/p\u003e\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eBeverageStation is comprised of fa few different parts:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eOne dual-sided clip that installs onto the wall of the lower console area on the passenger side. It rotates into position and locks in between where the two plastic trim pieces are joined.\u003c\/li\u003e\n\u003cli\u003eOne single sides clip that installs onto the wall of the lower console area on the driver side. It also rotates into position and locks in place.\u003c\/li\u003e\n\u003cli\u003eOne Main mount - a bar that slots into place connecting the two side clips. On the back of the mount\u003c\/li\u003e\n\u003cli\u003eUp to three clamps to hold your beverage of choice in place. These are flexible rings designed to hold the beverage container in place while it sits on center console liner, or passenger footwell.\u003c\/li\u003e\n\u003cli\u003eFor each clamp installed on the mounting bar, an additional 35-degree mount is provided. This allows for the drink to angle forward for easy reach, insertion, and removal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe \u003cmeta charset=\"utf-8\"\u003eBeverageStation has two size options for each clamp:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003cbr\u003e\u003c\/strong\u003e79MM wide. This size is designed to hold most common drink sizes such as cans, 20oz plastic bottles, most fast-food drinks, and 20ish oz vacuum insulated cups. Keep in mind that cans should only be held in the inner mounting location due to the lower floor in the passenger footwell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLarge\u003cbr\u003e\u003c\/strong\u003e92MM wide. This size is designed for common 40z water bottles and mugs. This size fits the recently introduced Stanley insulated beverage holder and most wider bottles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEach version flexes and has a cutout down the side so you can insert beverage holders that have a handle on them. Before purchasing, we strongly recommend measuring the beverages you're looking to install. \u003c\/p\u003e\n\u003ch2\u003eInstallation:\u003c\/h2\u003e\n\u003cp\u003eRotate the double-sided clip onto position on the wall of the passenger side of the lower center console. Make sure that the small protrusion fits in between the seam of the inner and outer plastic wall. Repeat the same process for the driver side single clip, making sure they are the same distance away from the front of the front of the open, lower center console. (About 4-5 inches works well)\u003c\/p\u003e\n\u003cp\u003eNext install, the main bar - its friction fit and should slot right into place between the two clips. We suggest the mounts for the beverage clamps be at the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003eFinally, install all clamps. They are also frictions fit and will have a small click when inserted. We suggest using the 35-degree adapters when installing the clamps on the main mount - these are optional, but they tilt the front forward slightly allowing it to be inserted easier, removed easier, and clear the bottom part of the dash.\u003c\/p\u003e\n\u003ch2\u003eOther Considerations:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBeveragestation will 100% clear the gloveboxes and the sliding tray, as shown in the pictures.\u003c\/li\u003e\n\u003cli\u003eClamps are somewhat flexible but bottles much larger than them should not be inserted.\u003c\/li\u003e\n\u003cli\u003eCups from the Aux Cupholder range will mount on the portion in the passenger footwell but will not mount on slot inside the lower center console.\u003c\/li\u003e\n\u003cli\u003eReplacement parts or additional clamps are available at the following link: \u003ca href=\"https:\/\/opensourceev.com\/search?q=BeverageStation\"\u003ehttps:\/\/opensourceev.com\/search?q=BeverageStation\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCredit:\u003c\/h2\u003e\n\u003cp\u003eThis product is a very slightly updated version of the Rivian Cup Holder Clips, made by Todd Stansell. Sold by permission of the author. You can download the design\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.printables.com\/model\/825942-rivian-cup-holders\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/MsCK7p9yAfs?si=kmm6Xi-lUi0tJlyR\" height=\"360\" width=\"640\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that we only offer the standard and large sizes - not the jumbo one in the video. Additionally, we do not use the Rivian logo on the product offered here due to trademark compliance.\u003c\/p\u003e","brand":"OpenSource EV Parts","offers":[{"title":"2 Standard \/ Standard","offer_id":48941644382365,"sku":null,"price":26.95,"currency_code":"USD","in_stock":true},{"title":"2 Standard \/ Large","offer_id":48941644415133,"sku":null,"price":26.95,"currency_code":"USD","in_stock":true},{"title":"2 Standard \/ None","offer_id":48941644447901,"sku":null,"price":24.95,"currency_code":"USD","in_stock":true},{"title":"2 Large \/ Standard","offer_id":48941644480669,"sku":null,"price":26.95,"currency_code":"USD","in_stock":true},{"title":"2 Large \/ Large","offer_id":48941644513437,"sku":null,"price":26.95,"currency_code":"USD","in_stock":true},{"title":"2 Large \/ None","offer_id":48941644546205,"sku":null,"price":24.95,"currency_code":"USD","in_stock":true},{"title":"1 Large \/ 1 Standard \/ Standard","offer_id":48941644578973,"sku":null,"price":26.95,"currency_code":"USD","in_stock":true},{"title":"1 Large \/ 1 Standard \/ Large","offer_id":48941644611741,"sku":null,"price":26.95,"currency_code":"USD","in_stock":true},{"title":"1 Large \/ 1 Standard \/ None","offer_id":48941644644509,"sku":null,"price":24.95,"currency_code":"USD","in_stock":true},{"title":"1 Standard \/ Standard","offer_id":48941644677277,"sku":null,"price":23.95,"currency_code":"USD","in_stock":true},{"title":"1 Standard \/ Large","offer_id":48941644710045,"sku":null,"price":23.95,"currency_code":"USD","in_stock":true},{"title":"1 Standard \/ None","offer_id":48941644742813,"sku":null,"price":21.95,"currency_code":"USD","in_stock":true},{"title":"1 Large \/ Standard","offer_id":48941644775581,"sku":null,"price":23.95,"currency_code":"USD","in_stock":true},{"title":"1 Large \/ Large","offer_id":48941644808349,"sku":null,"price":23.95,"currency_code":"USD","in_stock":true},{"title":"1 Large \/ None","offer_id":48941644841117,"sku":null,"price":21.95,"currency_code":"USD","in_stock":true},{"title":"None \/ Standard","offer_id":48941644873885,"sku":null,"price":20.95,"currency_code":"USD","in_stock":true},{"title":"None \/ Large","offer_id":48941644906653,"sku":null,"price":20.95,"currency_code":"USD","in_stock":true},{"title":"None \/ None","offer_id":48941644939421,"sku":null,"price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_5254.jpg?v=1790102009"},{"product_id":"beveragestation-mini-for-r2","title":"BeverageStation Mini for R2","description":"\u003cp\u003eThe OpenSourceEV\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eBeverageStation Mini\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor the Rivian R2 is our latest way to add drink storage to your truck or SUV. It holds \u003cspan style=\"text-decoration: underline;\"\u003eTWO\u003c\/span\u003e beverages of your choice within easy reach. They remain unobtrusive and easy to install in under 60 seconds.\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis smaller BeverageStation mounts on the passenger side of the lower center console opening, similar to where the Aux Cupholder Center Console Mount would install. It allows for storage of \u003cspan style=\"text-decoration: underline;\"\u003etwo\u003c\/span\u003e beverages of your choice - one in the passenger footwell, and now one \u003cspan style=\"text-decoration: underline;\"\u003eIN\u003c\/span\u003e the center console area. The mounting location is customizable so it will not impact with operation of the lower drawer or Camp Speaker.\u003c\/p\u003e\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eBeverageStation Mini is comprised of four individual parts:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eOne dual-sided clip that installs onto the wall of the lower console area. It rotates into position and locks in between where the two plastic trim pieces are joined.\u003c\/li\u003e\n\u003cli\u003eTwo clamps to hold your beverage of choice in place. Unlike the Aux Cupholders, these are rings and have no bottoms. The bottom of the beverage sits on the liner in the footwell or lower center console itself.\u003c\/li\u003e\n\u003cli\u003eOne rotation blocking insert that installs under the inner clamp. This hold everything securely in place after installation regardless of which side holds beverages.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe \u003cmeta charset=\"utf-8\"\u003eBeverageStation Mini has two size options:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003cbr\u003e\u003c\/strong\u003e79MM wide. This size is designed to hold most common drink sizes such as cans, 20oz plastic bottles, most fast-food drinks, and 20ish oz vacuum insulated cups. Keep in mind that cans should only be held in the inner mounting location due to the lower floor in the passenger footwell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLarge\u003cbr\u003e\u003c\/strong\u003e92MM wide. This size is designed for common 40z water bottles and mugs. This size fits the recently introduced Stanley insulated beverage holder and most wider bottles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEach version flexes and has a cutout down the side so you can insert beverage holders that have a handle on them. Before purchasing, we strongly recommend measuring the beverages you're looking to install. \u003c\/p\u003e\n\u003ch2\u003eInstallation:\u003c\/h2\u003e\n\u003cp\u003eRotate the clip onto position on the wall of the passenger side of the lower center console. Make sure that the small protrusion fits in between the seam of the inner and outer plastic wall. Install the two clamps - they are both frictions fit and will have a small click when inserted. Insert the rotation mount underneath slot that the inside-the-center-console clamp slid into in order to hold things in place.\u003c\/p\u003e\n\u003cp\u003eIn the images section of this product, there is an animated GIF showing how these rotate into place using a blue example item.\u003c\/p\u003e\n\u003ch2\u003eOther Considerations:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBeveragestation Mini will 100% clear the gloveboxes and the sliding tray.\u003c\/li\u003e\n\u003cli\u003eClamps are somewhat flexible but bottles much larger than them should not be inserted.\u003c\/li\u003e\n\u003cli\u003eCups from the Aux Cupholder range will mount on the portion in the passenger footwell but will not mount on slot inside the lower center console.\u003c\/li\u003e\n\u003cli\u003eReplacement parts or additional clamps are available at the following link: \u003ca href=\"https:\/\/opensourceev.com\/search?q=BeverageStation\"\u003ehttps:\/\/opensourceev.com\/search?q=BeverageStation\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCredit:\u003c\/h2\u003e\n\u003cp\u003eThis product is a very slightly updated version of the Rivian Cup Holder Clips, made by Todd Stansell. Sold by permission of the author. You can download the design\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.printables.com\/model\/825942-rivian-cup-holders\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"OpenSource EV Parts","offers":[{"title":"Regular \/ Regular","offer_id":48941653819549,"sku":null,"price":17.95,"currency_code":"USD","in_stock":true},{"title":"Regular \/ Large","offer_id":48941653852317,"sku":null,"price":17.95,"currency_code":"USD","in_stock":true},{"title":"Large \/ Regular","offer_id":48941653885085,"sku":null,"price":17.95,"currency_code":"USD","in_stock":true},{"title":"Large \/ Large","offer_id":48941653917853,"sku":null,"price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_5258.jpg?v=1790101982"},{"product_id":"center-console-organizer-pro-for-r2","title":"Center Console Organizer Pro for R2","description":"\u003cp\u003eThe OpenSourceEV Parts \u003cstrong\u003eCenter Console Organizer Pro\u003c\/strong\u003e for the Rivian R2 tames the center console with a custom organizer, now reworked for the R2 with a big side contours for easier access, an included liner, and a movable divider system.\u003c\/p\u003e\n\u003cp\u003eIt drops right into the console under the lids and is sized to drop in and go - snug enough that it will not twist, while still sliding for full-depth access and clearing the console lids when they close.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContoured for easy access:\u003c\/strong\u003e The side is contoured so you can get at your stored items more easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlides for full-depth access:\u003c\/strong\u003e The organizer slides forward and rearward in the console so you can reach items stored underneath without removing it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for card wallets:\u003c\/strong\u003e Wide enough to drop in popular card wallets and EV charging cars fit sideways while keeping them easy to remove.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-length mesh:\u003c\/strong\u003e The grid pattern runs the entire length of both sides, letting light through - daylight from the open console up top, or the console LED at night - while keeping the walls exceptionally strong.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiner included:\u003c\/strong\u003e A soft, flexible TPU liner comes standard, sized to fit the bottom of the organizer. It removes easily and wipes clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-divider system:\u003c\/strong\u003e Two movable dividers insert into the mesh diamonds, with small side nubs that lock them into the grid. They are lightly meshed so light passes through and they flex to fit what you pack. Place them nearly anywhere, or leave them out. Same matching mesh as the Adjustable Center Console Divider Pro.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included:\u003c\/strong\u003e The organizer, the TPU liner, and two dividers.\u003c\/p\u003e\n\u003cp\u003ePairs with the OpenSourceEV Adjustable Center Console Divider Pro for the Rivian R2, which installs right below.\u003c\/p\u003e\n\u003cp\u003eFits the Rivian R2. Need more dividers? Extra dividers are available soon for $1 each.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":48941659062429,"sku":"CCOP_R2","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_5236.jpg?v=1790102038"},{"product_id":"adjustable-center-console-divider-pro-for-r2","title":"Adjustable Center Console Divider Pro for R2","description":"\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eAdjustable Center Console Divider Pro\u003c\/strong\u003e for the Rivian R2 lets you change the size and shape of the storage spaces in the center console. It is positionable in nine different configurations, so you can customize the resulting four quadrants to best fit your individual needs.\u003c\/p\u003e\n\u003cp\u003eSame nine-configuration flexibility with a full-mesh build, a redesigned retaining puck, and matching mesh to the new Center Console Organizer Pro.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-mesh panels:\u003c\/strong\u003e Both panels are meshed to let light flow through the console - daylight from above or the console LED at night - while flexing just enough to accommodate whatever you pack in. Same matching mesh as the Center Console Organizer Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedesigned retaining puck:\u003c\/strong\u003e A revised puck keeps the panels rigid in every configuration and holds the divider securely in place. The panels are notched on the bottom so the puck seats cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine configurations:\u003c\/strong\u003e Two slotted panels - one front-to-back, one side-to-side - drop into the console and turn the bottom into four distinct areas. Reposition them to reshape the quadrants around what you carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built fit:\u003c\/strong\u003e The front-to-back panel accounts for the slat at the front, and the side-to-side panel is sized to fit the console precisely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included:\u003c\/strong\u003e A front-to-back slotted panel, a side-to-side slotted panel, and the alignment puck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlot the two panels together, attach the alignment puck on the bottom, and drop the assembly in. You may need to turn it sideways to clear the center console lids.\u003c\/li\u003e\n\u003cli\u003ePosition the divider so the puck is at the bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePairs perfectly with the OpenSourceEV \u003cstrong\u003eCenter Console Organizer Pro\u003c\/strong\u003e for the Rivian R2, which installs right above it. (shown in pictures, not included) The top of the divider comes up to just below the slant with the USB-C ports. Configured as one large area, it accommodates a standard 4.25\" x 4.25\" square tissue box as shown as well.\u003c\/p\u003e\n\u003cp\u003eFits the Rivian R2.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":48941668171933,"sku":"ACDP_R2","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_5228.jpg?v=1790102024"},{"product_id":"lower-center-console-divider-pro-for-r2","title":"Lower Center Console Divider Pro for R2","description":"\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eLower Center Console Divider\u003c\/strong\u003e for the Rivian R2 brings order to the lower sliding storage tray, splitting it into sections you can reshape around whatever you carry.\u003c\/p\u003e\n\u003cp\u003eIt uses the same full-mesh build and matching mesh as our other console products, sized specifically for the longer, shallower lower tray.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-section layout:\u003c\/strong\u003e One long front-to-back panel and two shorter side-to-side panels divide the tray into six distinct sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully adjustable:\u003c\/strong\u003e Reposition the panels to reshape the sections, or leave panels out for larger open areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-mesh panels:\u003c\/strong\u003e All panels are meshed to let light through while flexing just enough to accommodate what you pack in. Same matching mesh as our other console products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetaining pucks:\u003c\/strong\u003e The panels are notched on the bottom so the pucks seat cleanly and hold the assembly rigid and in place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included:\u003c\/strong\u003e One long front-to-back slotted panel, two shorter side-to-side slotted panels, and two alignment pucks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlot the panels together, attach the pucks on the bottom, and drop the assembly into the lower sliding tray. \u003c\/li\u003e\n\u003cli\u003ePosition the divider so the pucks are at the bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits the Rivian R2.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":48941686358173,"sku":"LCCD_R2","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_5240.jpg?v=1790101960"},{"product_id":"hatch-pocket-divider-pro-for-r2","title":"Hatch Pocket Divider Pro for R2","description":"\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eHatch Pocket Divider Pro\u003c\/strong\u003e for the Rivian R2 brings order to the side pockets inside the hatch, splitting each pocket into sections you can reshape around whatever you carry.\u003c\/p\u003e\n\u003cp\u003eIt uses the same full-mesh build and matching mesh as our other divider products, sized specifically for the hatch pockets.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-section layout:\u003c\/strong\u003e One front-to-back panel and one side-to-side panel drop into the pocket and turn it into four distinct sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully adjustable:\u003c\/strong\u003e Reposition the panels to reshape the sections around what you carry, or leave one out for larger areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-mesh panels:\u003c\/strong\u003e Both panels are meshed to let light through while flexing just enough to accommodate what you pack in. Same matching mesh as our other divider products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetaining puck:\u003c\/strong\u003e The panels are notched on the bottom so the puck seats cleanly and holds the assembly rigid and in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits either pocket:\u003c\/strong\u003e One design fits either hatch pocket - just install it facing the opposite way for the other side. Add two to your cart to outfit both pockets at a discount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included:\u003c\/strong\u003e One front-to-back slotted panel, one side-to-side slotted panel, and the alignment puck for one pocket. Add two to your cart for both pockets at a discount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlot the two panels together, attach the puck on the bottom, and drop the assembly into the hatch pocket.\u003c\/li\u003e\n\u003cli\u003ePosition the divider so the puck is at the bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese dividers also fit beneath the Hatch Pocket Cover.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":48941712507037,"sku":"HPD_R2","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_5247.jpg?v=1790102050"},{"product_id":"hatch-pocket-cover-for-r2","title":"Hatch Pocket Cover for R2","description":"\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eHatch Pocket Cover\u003c\/strong\u003e for the Rivian R2 gives the side pockets inside the hatch a clean, finished look while keeping your stored items out of sight.\u003c\/p\u003e\n\u003cp\u003eIt is sized to sit right between the lined hatch cover and the plastic hatch walls, resting on the brim of the pocket. A finger hole lets you lift it out whenever you need access.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean finished look:\u003c\/strong\u003e Covers the open hatch pocket, sitting on the pocket rim so contents stay hidden.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStays put, lifts out easily:\u003c\/strong\u003e A snug fit keeps it in place, and a finger hole makes removal simple.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid, reinforced build:\u003c\/strong\u003e A solid top with reinforcements underneath for strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTextured finish:\u003c\/strong\u003e A textured top surface comes closer to the factory finish and resists fingerprints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with or without the divider:\u003c\/strong\u003e The Hatch Pocket Divider Pro sits below the pocket rim, so the cover fits over it or over an empty pocket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits either pocket:\u003c\/strong\u003e One design fits both hatch pockets. Add two to your cart to cover both at a discount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included:\u003c\/strong\u003e One cover. Add two to your cart for both pockets at a discount.\u003c\/p\u003e\n\u003cp\u003eFits the Rivian R2.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":48941779943581,"sku":"HPC_R2","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_5248.jpg?v=1790101993"},{"product_id":"nacs-adapter-holder-for-r2","title":"NACS Adapter Holder for R2","description":"\u003cp\u003eThe OpenSourceEV Parts \u003cstrong\u003eNACS Adapter Holder\u003c\/strong\u003e for the Rivian R2 gives your CCS-1 to NACS charging adapter a secure, rattle-free home in the driver door pocket, so the R2 can charge at older CCS-1 stations with the adapter always on hand.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds your CCS-1 to NACS adapter:\u003c\/strong\u003e Works with either the Lectron or OEM Rivian CCS-1 to NACS adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso fits an L2 adapter:\u003c\/strong\u003e Works with an L2 J1772 to NACS adapter as well, in OEM Rivian, Tesla, or Lectron form.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered rattle-free:\u003c\/strong\u003e Designed to hold the adapter firmly so it will not rattle as you drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace-saving orientation:\u003c\/strong\u003e The adapter sits high in the pocket with the slim NACS side inserted and pointing downward, above the rim of the door pocket retainer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable and out of the way:\u003c\/strong\u003e Sitting close to the armrest above keeps it stable so it will not fall out, while using space that would otherwise go unused.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e Just tilt the door pocket retainer outward to pull the adapter out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage underneath:\u003c\/strong\u003e Because the adapter sits up high, items such as umbrellas, gloves, and more can still be stored in the pocket below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFar more convenient than letting the adapter rattle around in the glovebox, take up valuable center console space, or ride in the hatch like other solutions.\u003c\/p\u003e\n\u003cp\u003eThe hanger portion of this holder uses the same mount as the \u003cstrong\u003eAux Cupholder for R2\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eMade from durable ASA plastic in a matching black finish.\u003c\/p\u003e\n\u003cp\u003eFits the Rivian R2.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":48941817856157,"sku":"NACS_R2","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/IMG_5224.jpg?v=1790188345"},{"product_id":"nacs-adapter-holder-duo-for-r2","title":"NACS Adapter Holder Duo for R2 V1.5","description":"\u003cp\u003eThe OpenSourceEV Parts \u003cstrong\u003eNACS Adapter Holder Duo\u003c\/strong\u003e for the Rivian R2 gives both of your charging adapters a secure, rattle-free home in the driver door pocket, so the R2 is ready for older CCS-1 stations and L2 charging with both adapters always on hand.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNow updated with a wider design that fits a broader range of adapters, including A2Z.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds both adapters together:\u003c\/strong\u003e Stores your CCS-1 to NACS adapter and your L2 J1772 to NACS adapter side by side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCS-1 to NACS:\u003c\/strong\u003e Works with the OEM Rivian, Lectron, or A2Z CCS-1 to NACS adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL2 J1772 to NACS:\u003c\/strong\u003e Works with the OEM Rivian, Tesla, Lectron, or A2Z L2 J1772 to NACS adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered rattle-free:\u003c\/strong\u003e Designed to hold both adapters firmly so they will not rattle as you drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace-saving orientation:\u003c\/strong\u003e Each adapter sits high in the pocket with the slim NACS side inserted and pointing downward, above the rim of the door pocket retainer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable and out of the way:\u003c\/strong\u003e Sitting close to the armrest above keeps both adapters stable so they will not fall out, while using space that would otherwise go unused.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e Just tilt the door pocket retainer outward to pull an adapter out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage underneath:\u003c\/strong\u003e Because the adapters sit up high, items can still be stored in the pocket below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFar more convenient than letting your adapters rattle around in the glovebox, take up valuable center console space, or ride loose in the hatch like other solutions.\u003c\/p\u003e\n\u003cp\u003eThe hanger portion of this holder uses the same mount as the R2 Aux Cupholder.\u003c\/p\u003e\n\u003cp\u003eMade from durable ASA plastic in a matching black finish.\u003c\/p\u003e\n\u003cp\u003eFits the Rivian R2.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":48941831651485,"sku":"NACS_DUO_R2","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/12AB82D5-9CC7-48B1-A563-136B1E873805_1_201_a.jpg?v=1792780434"},{"product_id":"quickgrip-cup-holder-for-r2","title":"QuickGrip Cup Holder for R2","description":"\u003ch2\u003e\u003cstrong\u003eQuickGrip Cup Holder for the Rivian R2\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eQuickGrip Cup Holder\u003c\/strong\u003e for the Rivian R2 is the simplest way to add a drink holder in your lower center console. A single clip and a grip clamp keep a bottle upright in the open console tray instead of rolling around the footwell. No tools. Snaps on in seconds. Designed by Todd Stansell, manufactured and sold by OpenSourceEV, and tested in a Rivian R2.\u003c\/p\u003e\n\u003ch3\u003eWhat Makes This Different\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e$9.95 Introductory Price:\u003c\/strong\u003e The cheapest way into our cup holder line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Install:\u003c\/strong\u003e Snaps on by hand in seconds. No tools, no adhesives, no modifications to your Rivian.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff the Floor:\u003c\/strong\u003e Holds your bottle inside the center console tray, not on the floor mat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop Off and Stow:\u003c\/strong\u003e Removes by hand when you need the full console tray back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Clamp Sizes:\u003c\/strong\u003e Standard (79mm) holds standard water bottles and insulated tumblers. Large (92mm) holds 40oz bottles and handled mugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-Compatible Parts:\u003c\/strong\u003e Uses the same clamp as our BeverageStation line and the same attachment mechanism and locking pins as our Aux Cup Holder Kit. Parts carry over if you add on later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Source Design:\u003c\/strong\u003e Design files are publicly available for personal use and remix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eR2 Center Console\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Rivian R2. Mounts either side of the center console. Shown as installed on the passenger side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Hooks over the side wall of the open center console tray and snaps into place by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse Case:\u003c\/strong\u003e Keeps a single drink upright inside the console tray, within reach from the front seats, while leaving the rest of the tray open for storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eClamp Sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard (79mm):\u003c\/strong\u003e Designed to hold most common drink sizes such as 20oz plastic bottles, most fast-food drinks, and 20-ish oz vacuum insulated cups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge (92mm):\u003c\/strong\u003e Designed for common 40oz water bottles and mugs. This size fits the recently introduced Stanley insulated beverage holder and most wider bottles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach version flexes and has a cutout down the side so you can insert beverage holders that have a handle on them. Before purchasing, we strongly recommend measuring the beverages you're most likely to drink from.\u003c\/p\u003e\n\u003ch3\u003eIf You Need More\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore Drinks Up Front:\u003c\/strong\u003e The \u003ca href=\"https:\/\/opensourceev.com\/products\/beveragestation-mini-for-r2\"\u003eBeverageStation Mini For R2\u003c\/a\u003e holds two drinks and the full \u003ca href=\"https:\/\/opensourceev.com\/products\/beveragestation-for-r2\"\u003eBeverageStation for R2\u003c\/a\u003e holds three. All three products use the same clamp design -- clamps are interchangeable and available as individual replacements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor-Mounted Cup Holders:\u003c\/strong\u003e The \u003ca href=\"https:\/\/opensourceev.com\/products\/nextgen-aux-cupholder\"\u003eAux Cup Holder Kit for R2\u003c\/a\u003e mounts to your doors and door pockets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBehind the Front Seats:\u003c\/strong\u003e The \u003ca href=\"https:\/\/opensourceev.com\/products\/seat-back-attachment-system\"\u003eSeat Back Attachment System\u003c\/a\u003e adds a cup holder behind the front seats and is expected to fit the R2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCredits\u003c\/h3\u003e\n\u003cp\u003eThis product is based on the Rivian Cup Holder Clips designed by Todd Stansell and sold by permission of the original author. The original design is available for free download on Printables.\u003c\/p\u003e","brand":"OpenSourceEV KIT","offers":[{"title":"Standard","offer_id":52983718084888,"sku":null,"price":9.95,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":52983718117656,"sku":null,"price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/5C1C49D3-2637-4DE0-BAF4-3F0B6B7EB73D_1_201_a.jpg?v=1792693930"},{"product_id":"hitch-receiver-storage-box-v2-5-se","title":"Hitch Receiver Storage Box V2.5 SE","description":"\u003cp\u003eThe OpenSourceEV\u003cstrong\u003e Hitch Receiver Storage Box V2.5 SE\u003c\/strong\u003e is the Special Edition of our snap-in hitch storage box for the Rivian R2, R1S, and R1T. Same box as the standard V2.5, with a white-on-black faceplate styled after a NEMA 14-50 receptacle. It is our first multicolor print. Designed, manufactured, and supported by OpenSourceEV, and tested in Rivian vehicles.\u003c\/p\u003e\n\u003ch3\u003eWhat Makes This Different\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 14-50 Faceplate:\u003c\/strong\u003e Two-color receptacle design with the white detail printed directly into the part -- not painted or a sticker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap-In Retention:\u003c\/strong\u003e Reinforced side clips lock the box into the hitch receiver. No tools, bolts, straps, or adhesives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide-Top Lid:\u003c\/strong\u003e Stays closed when you need it closed and stops at the groove when open so it does not fall off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cover Compatible:\u003c\/strong\u003e Fits under the factory Rivian hitch cover with no modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Printed from ASA for UV resistance and heat resilience. Made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassic Look:\u003c\/strong\u003e The standard \u003ca href=\"https:\/\/opensourceev.com\/products\/hitch-receiver-storage-box-v2\"\u003eHitch Receiver Storage Box V2.5\u003c\/a\u003e is the same box with a plain single-color face and is slightly less expensive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Cover Access:\u003c\/strong\u003e The \u003ca href=\"https:\/\/opensourceev.com\/products\/hitch-cover-thumbscrew-v2-pair\"\u003eHitch Cover Thumbscrew V2 (Pair)\u003c\/a\u003e replaces the factory hitch cover screws so you can reach the box without a screwdriver.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":52984033181976,"sku":"HRSB_SE","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/A4D18BF3-E838-49DB-AA87-510E7F23C6CA_1_201_a.jpg?v=1792693948"},{"product_id":"triplelock-phone-mount-for-r2","title":"TripleLock Phone Mount for R2","description":"\u003ch2\u003eTripleLock Phone Mount for the Rivian R2\u003c\/h2\u003e\n\u003cp\u003eThe OpenSourceEV Parts \u003cstrong\u003eTripleLock Phone Mount\u003c\/strong\u003e puts your phone right where you want it in the Rivian R2: at eye level, clear of the steering wheel, and within easy reach. It locks in solid, so your screen stays steady instead of bouncing on every bump, and it leaves the dash vent working exactly as it should.\u003c\/p\u003e\n\u003cp\u003eDesigned, manufactured, and supported by OpenSourceEV, and \u003cem\u003eextensively\u003c\/em\u003e tested in a Rivian R2.\u003c\/p\u003e\n\u003ch3\u003eWhy the TripleLock\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Right Spot:\u003c\/strong\u003e The TripleLock sits at the far left end of the dashboard, next to the driver's door -- the only place with room. Your phone stays in your line of sight for navigation and calls without blocking the R2's screens or hiding behind the steering wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked In, Not Just Clipped On:\u003c\/strong\u003e Most snap-in phone mounts are held only at the top and bottom, which lets them pivot and bounce over every bump. The TripleLock is held at three points -- the left, the bottom, and a diagonal from the top to the right -- so it has nowhere to move. Your phone stays steady and stays where you aimed it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour Air Vent Still Works:\u003c\/strong\u003e The left end of the R2's dash vent has a short section with no airflow. The TripleLock fits entirely inside that section, so the vent keeps blowing exactly as Rivian designed it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Damage, No Modifications:\u003c\/strong\u003e It snaps in by hand behind the existing dash trim in less than 5 seconds. No adhesives, no drilling, no tools in the car, and it pops back out cleanly whenever you want.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks With the Holder You Want:\u003c\/strong\u003e The mount uses a standard ball joint, the same connection most car phone holders use. Add one of our MagSafe holders at checkout, or use a compatible holder you already own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e The ball is bolted on with a stainless steel bolt and nut, not plastic clips that can snap. If you ever switch holders or damage the ball, you replace just the ball -- not the whole mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Car Interiors:\u003c\/strong\u003e This is a 3D printed part made from ASA, a plastic designed to resist sun fading and heat, so it holds up on a dashboard year-round. We print every one ourselves in Pittsburgh, PA, and back it with a 1-year warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassenger Side Available:\u003c\/strong\u003e A mirror-image passenger-side version is sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Three Points Matter\u003c\/h3\u003e\n\u003cp\u003eA phone mount is only as good as what it's anchored to. A mount held at just two points acts like a hinge: the weight of your phone rocks it back and forth, and road vibration does the rest. Your screen shakes, the holder works loose, and your phone ends up pointed somewhere you didn't aim it. The TripleLock's third, diagonal contact point removes that hinge. Once it snaps in, it stays put -- on the highway and on rough pavement.\u003c\/p\u003e\n\u003ch3\u003eChoosing a Phone Holder\u003c\/h3\u003e\n\u003cp\u003eThe TripleLock is the part that attaches to your R2. The phone holder is the part that holds your phone. It clamps onto the round ball at the end of the mount, and you can tilt and rotate it to the exact angle you want, then lock it with a small screw on the back.\u003c\/p\u003e\n\u003cp\u003eWe've standardized on MagSafe so your phone snaps on and off magnetically with one hand. MagSafe is built into iPhone 12 and newer, and MagSafe-compatible cases are available for nearly every phone on the market, Android included. If your phone or case doesn't have MagSafe, every holder includes a metal ring you can stick to your phone or case so it works the same way.\u003c\/p\u003e\n\u003cp\u003eFour holders are available at checkout, with more coming soon:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSEV Offset Charging MagSafe:\u003c\/strong\u003e Our own holder. Charges your phone wirelessly while it's mounted. A dim blue LED ring helps you line up your phone at night. Draws less than 1mW when not charging, so it won't drain your battery. 17mm only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATB 720 Degree MagSafe:\u003c\/strong\u003e Non-charging. A second adjustment point along the arm gives the most positioning flexibility of any holder we carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLisen Offset MagSafe:\u003c\/strong\u003e Non-charging. A simple, slim magnetic holder with an offset arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLisen Charging MagSafe:\u003c\/strong\u003e Charges your phone wirelessly, fast and with minimal heat. A near-invisible blue LED ring helps you line up your phone at night. Draws less than 1mW when not charging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCharging holders include a USB-A to USB-C cable and need an OBD-II to USB power source to plug into -- more on that below.\u003c\/p\u003e\n\u003ch3\u003eBall Size Guide\u003c\/h3\u003e\n\u003cp\u003ePhone holders are made to fit a few common ball sizes, so the ball on your mount needs to match your holder. The TripleLock is available with a 17mm, 20mm, or 1-inch ball, or a combo pack with all three. The 17mm size fits the vast majority of phone holders, including every holder we sell. The 20mm size fits Offroam x Peak Design co-branded holders. The 1-inch size is for RAM-branded accessories only. If you're buying a holder from us or aren't sure, choose 17mm or the combo pack.\u003c\/p\u003e\n\u003ch3\u003eCharging Your Phone\u003c\/h3\u003e\n\u003cp\u003eA charging holder needs a power source. The recommended option is the OpenSourceEV OBD-II adapter, which plugs into your R2's OBD-II port (a standard connector found on every modern car) and provides both a USB-A Quick Charge 3.0 port and a USB-C PD port, with up to 48W of total combined output. That's enough to charge your phone at 15W.\u003c\/p\u003e\n\u003cp\u003eFaster 25W wireless charging requires a 15-volt USB-C PD supply, and we tested five OBD-II to USB adapters -- including every one our competitors sell -- and none of them provide it. If someone claims faster charging from an OBD-II port, be very, \u003cem\u003every\u003c\/em\u003e skeptical.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"17MM \/ Mount Only","offer_id":52984591253784,"sku":"3Lock_17","price":14.95,"currency_code":"USD","in_stock":true},{"title":"17MM \/ ATB 720 Degree Magsafe","offer_id":52984591286552,"sku":null,"price":22.95,"currency_code":"USD","in_stock":true},{"title":"17MM \/ Lisen Magsafe Offset","offer_id":52984591352088,"sku":null,"price":23.95,"currency_code":"USD","in_stock":true},{"title":"17MM \/ Lisen Magsafe Charging","offer_id":52984591384856,"sku":null,"price":29.95,"currency_code":"USD","in_stock":true},{"title":"17MM \/ OSEV Offset Magsafe Charging","offer_id":52984591319320,"sku":null,"price":27.95,"currency_code":"USD","in_stock":true},{"title":"20MM \/ Mount Only","offer_id":52984591450392,"sku":"3Lock_20","price":14.95,"currency_code":"USD","in_stock":true},{"title":"1 Inch \/ Mount Only","offer_id":52984591483160,"sku":"3Lock_1IN","price":14.95,"currency_code":"USD","in_stock":true},{"title":"All \/ Mount Only","offer_id":52984906383640,"sku":null,"price":15.95,"currency_code":"USD","in_stock":true},{"title":"All \/ ATB 720 Degree Magsafe","offer_id":52984906416408,"sku":null,"price":23.95,"currency_code":"USD","in_stock":true},{"title":"All \/ Lisen Magsafe Offset","offer_id":52984906449176,"sku":null,"price":24.95,"currency_code":"USD","in_stock":true},{"title":"All \/ Lisen Magsafe Charging","offer_id":52984906481944,"sku":null,"price":30.95,"currency_code":"USD","in_stock":true},{"title":"All \/ OSEV Offset Magsafe Charging","offer_id":52984906514712,"sku":null,"price":28.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/BDE85B41-359A-47A5-B7C9-9BFEF843640F_1_201_a.jpg?v=1792694000"},{"product_id":"triplelock-phone-mount-for-r2-passenger","title":"TripleLock Phone Mount for R2 - Passenger","description":"\u003ch2\u003eTripleLock Phone Mount for R2 - Passenger\u003c\/h2\u003e\n\u003cp\u003eThe OpenSourceEV Parts \u003cstrong\u003eTripleLock Phone Mount\u003c\/strong\u003e gives your front-seat passenger a phone spot of their own in the Rivian R2. Mounted at the far right of the dash, it holds their phone at eye level and within easy reach -- for co-piloting navigation, running the music, or watching a show at a charging stop. It locks in solid, so the screen stays steady instead of bouncing on every bump, and it leaves the dash vent working exactly as it should.\u003c\/p\u003e\n\u003cp\u003eDesigned, manufactured, and supported by OpenSourceEV, and \u003cem\u003eextensively\u003c\/em\u003e tested in a Rivian R2.\u003c\/p\u003e\n\u003ch3\u003eWhy the TripleLock\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Right Spot:\u003c\/strong\u003e The TripleLock sits at the far right end of the dashboard, next to the passenger door. It mounts in the vent trim -- not on the airbag cover -- and above the glovebox, so it never gets in the way of opening it. It's directly in front of your passenger, out of the driver's line of sight, and clear of the R2's screens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked In, Not Just Clipped On:\u003c\/strong\u003e Most snap-in phone mounts are held only at the top and bottom, which lets them pivot and bounce over every bump. The TripleLock is held at three points -- the right, the bottom, and a diagonal from the top to the left -- so it has nowhere to move. The phone stays steady and stays where you aimed it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour Air Vent Still Works:\u003c\/strong\u003e The right end of the R2's dash vent has a short section with no airflow. The TripleLock fits entirely inside that section, so the vent keeps blowing exactly as Rivian designed it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Damage, No Modifications:\u003c\/strong\u003e It snaps in by hand behind the existing dash trim in less than 5 seconds. No adhesives, no drilling, no tools in the car, and it pops back out cleanly whenever you want.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks With the Holder You Want:\u003c\/strong\u003e The mount uses a standard ball joint, the same connection most car phone holders use. Add one of our MagSafe holders at checkout, or use a compatible holder you already own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e The ball is bolted on with a stainless steel bolt and nut, not plastic clips that can snap. If you ever switch holders or damage the ball, you replace just the ball -- not the whole mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Car Interiors:\u003c\/strong\u003e This is a 3D printed part made from ASA, a plastic designed to resist sun fading and heat, so it holds up on a dashboard year-round. We print every one ourselves in Pittsburgh, PA, and back it with a 1-year warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver Side Available:\u003c\/strong\u003e A mirror-image driver-side version is sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Three Points Matter\u003c\/h3\u003e\n\u003cp\u003eA phone mount is only as good as what it's anchored to. A mount held at just two points acts like a hinge: the weight of your phone rocks it back and forth, and road vibration does the rest. Your screen shakes, the holder works loose, and your phone ends up pointed somewhere you didn't aim it. The TripleLock's third, diagonal contact point removes that hinge. Once it snaps in, it stays put -- on the highway and on rough pavement.\u003c\/p\u003e\n\u003ch3\u003eChoosing a Phone Holder\u003c\/h3\u003e\n\u003cp\u003eThe TripleLock is the part that attaches to your R2. The phone holder is the part that holds your phone. It clamps onto the round ball at the end of the mount, and you can tilt and rotate it to the exact angle you want, then lock it with a small screw on the back.\u003c\/p\u003e\n\u003cp\u003eWe've standardized on MagSafe so your phone snaps on and off magnetically with one hand. MagSafe is built into iPhone 12 and newer, and MagSafe-compatible cases are available for nearly every phone on the market, Android included. If your phone or case doesn't have MagSafe, every holder includes a metal ring you can stick to your phone or case so it works the same way.\u003c\/p\u003e\n\u003cp\u003eTwo holders are available at checkout, with more coming soon:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eATB 720 Degree MagSafe:\u003c\/strong\u003e A second adjustment point along the arm gives the most positioning flexibility of any holder we carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLisen Offset MagSafe:\u003c\/strong\u003e A simple, slim magnetic holder with an offset arm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere's no convenient power source on the passenger side of the R2, so charging holders are offered on the driver-side version only.\u003c\/p\u003e\n\u003ch3\u003eBall Size Guide\u003c\/h3\u003e\n\u003cp\u003ePhone holders are made to fit a few common ball sizes, so the ball on your mount needs to match your holder. The TripleLock is available with a 17mm, 20mm, or 1-inch ball, or a combo pack with all three. The 17mm size fits the vast majority of phone holders, including every holder we sell. The 20mm size fits Offroam x Peak Design co-branded holders. The 1-inch size is for RAM-branded accessories only. If you're buying a holder from us or aren't sure, choose 17mm or the combo pack.\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"17MM \/ Mount Only","offer_id":52993654325528,"sku":"3Lock_Pass_17","price":14.95,"currency_code":"USD","in_stock":true},{"title":"17MM \/ ATB 720 Degree Magsafe","offer_id":52993654358296,"sku":null,"price":22.95,"currency_code":"USD","in_stock":true},{"title":"17MM \/ Lisen Magsafe Offset","offer_id":52993654391064,"sku":null,"price":23.95,"currency_code":"USD","in_stock":true},{"title":"20MM \/ Mount Only","offer_id":52993654489368,"sku":"3Lock_Pass_20","price":14.95,"currency_code":"USD","in_stock":true},{"title":"1 Inch \/ Mount Only","offer_id":52993654522136,"sku":"3Lock_Pass_1IN","price":14.95,"currency_code":"USD","in_stock":true},{"title":"All \/ Mount Only","offer_id":52993654554904,"sku":null,"price":15.95,"currency_code":"USD","in_stock":true},{"title":"All \/ ATB 720 Degree Magsafe","offer_id":52993654587672,"sku":null,"price":23.95,"currency_code":"USD","in_stock":true},{"title":"All \/ Lisen Magsafe Offset","offer_id":52993654620440,"sku":null,"price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/8FD3536E-5103-4006-84B6-B0D5406F7ABD_1_201_a.jpg?v=1792780345"},{"product_id":"aux-cupholder-kit-for-r2","title":"Aux Cupholder Kit for R2","description":"\u003ch2\u003eAux Cupholder Kit for R2\u003c\/h2\u003e\n\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eAux Cupholder Kit for R2\u003c\/strong\u003e adds a drink holder right on the door of your Rivian R2, where you and your passengers can actually reach it. No more wedging a bottle between the seat and console or rolling around the floor. It installs by hand in seconds, locks in place, and comes off just as easily when you don't need it.\u003c\/p\u003e\n\u003ch3\u003eWhy the Aux Cupholder Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA Drink Where You Need It:\u003c\/strong\u003e Mounts to the door, so every seat -- front or back -- can have its own cup holder within arm's reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Mounting Spots:\u003c\/strong\u003e Choose the Upper hanger, which hangs from the top of the door by the window, or the Lower hanger, which grips the door pocket. Mix and match to put drinks wherever your passengers want them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Tools, No Damage:\u003c\/strong\u003e The hanger installs by hand and the cup clips on. No adhesives, no drilling, no modifications to your R2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocks In Place:\u003c\/strong\u003e An included retaining pin locks the cup to the hanger so it stays put on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Big Bottles Too:\u003c\/strong\u003e Two cup sizes cover everything from a soda can to a 40oz water bottle, and both have a side cutout for mugs and bottles with handles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Car Interiors:\u003c\/strong\u003e 3D printed from ASA, a plastic designed to resist sun fading and heat. We print every one ourselves in Pittsburgh, PA, and back it with a 1-year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a Hanger\u003c\/h3\u003e\n\u003cp\u003eEach kit includes one hanger and one cup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Door \u003cmeta charset=\"utf-8\"\u003e(Front or Rear):\u003c\/strong\u003e Hangs from the channel at the top of the door, where the window meets the door panel. Puts your drink up high, close to hand. \u003cmeta charset=\"utf-8\"\u003eAvailable in front and rear door versions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Door Pocket (Front or Rear):\u003c\/strong\u003e Grips the door pocket for a secure friction fit. Keeps your drink lower and out of the way. Available in front and rear door versions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a Cup Size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e 79mm wide at the top, 71mm at the bottom, 89mm tall. Fits cans, 20oz plastic bottles, most fast-food cups, and 20oz-ish insulated bottles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge:\u003c\/strong\u003e 92mm wide throughout, 102mm tall. Fits 40oz water bottles and mugs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth sizes flex slightly to grip your drink. We strongly recommend measuring the cups and bottles you use most before ordering.\u003c\/p\u003e\n\u003ch3\u003eAdd More Anytime\u003c\/h3\u003e\n\u003cp\u003eWant a drink holder at every seat? \u003ca href=\"https:\/\/opensourceev.com\/products\/nextgen-aux-cupholder-cup\"\u003eExtra cups\u003c\/a\u003e are available separately. The cups and retaining pins are shared across our cup holder line, so parts carry over as you add on -- you never have to rebuy the whole kit.\u003c\/p\u003e\n\u003cp\u003eNeed a drink holder behind the front seats? The \u003ca href=\"https:\/\/opensourceev.com\/products\/seat-back-attachment-system\"\u003eSeat Back Attachment System\u003c\/a\u003e fits the R2 and offers a cup holder attachment. More R2 cup holder options are coming soon.\u003c\/p\u003e\n\u003ch3\u003eCredits\u003c\/h3\u003e\n\u003cp\u003eThis product is based on the Rivian Cup Holder Clips designed by Todd Stansell and sold by permission of the original author. The original design is available for free download on Printables.\u003c\/p\u003e","brand":"OpenSourceEV KIT","offers":[{"title":"Front Door Sill \/ Standard","offer_id":52997196218648,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true},{"title":"Front Door Sill \/ Large","offer_id":52997196251416,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true},{"title":"Front Door Pocket \/ Standard","offer_id":52997250056472,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true},{"title":"Front Door Pocket \/ Large","offer_id":52997250089240,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true},{"title":"Rear Door Sill \/ Standard","offer_id":52997196284184,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true},{"title":"Rear Door Sill \/ Large","offer_id":52997196316952,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true},{"title":"Rear Door Pocket \/ Standard","offer_id":52997196349720,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true},{"title":"Rear Door Pocket \/ Large","offer_id":52997196382488,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/79BEDFAB-401C-48B1-B9BA-1D838D464585_1_201_a.jpg?v=1792780360"},{"product_id":"obd-ii-dual-usb-charger","title":"OBD-II Dual USB Charger","description":"\u003ch2\u003eOBD-II Dual USB Charger for R2\u003c\/h2\u003e\n\u003cp\u003eThe OpenSourceEV \u003cstrong\u003eOBD-II Dual USB Charger\u003c\/strong\u003e gives your Rivian R2 a clean, hidden power source for a charging phone holder, a dashcam, or anything else that runs on USB. It plugs straight into the R2's OBD-II port, so there are no cables snaking from the center console and no outlets taken up. We tested it alongside every OBD-II charger we could find, including the ones our competitors sell, and it matched the best of them.\u003c\/p\u003e\n\u003ch3\u003eWhy This Charger\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to Fit the R2:\u003c\/strong\u003e Many OBD-II chargers are too bulky or too squat to seat fully past the plastic trim around the R2's port. This one clears it and plugs in all the way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts Face the Right Way:\u003c\/strong\u003e Once installed, the USB ports face toward the door rather than down into the footwell. Your cable runs cleanly up and along the dash to your phone mount, without kinking, dangling at your feet, or catching on your shoes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoth USB-A and USB-C:\u003c\/strong\u003e One of each, so it works with any charging MagSafe holder, including the ones we sell and the ones you may already own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Charging on Either Port:\u003c\/strong\u003e USB-C supports Power Delivery (PD) up to 27W, and USB-A supports Quick Charge 3.0 up to 18W -- enough to run a charging MagSafe holder at its full 15W wireless rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHidden Power:\u003c\/strong\u003e Your OBD-II port is a standard connector found on every modern car. Using it for power keeps wires short and out of sight, routed straight to a phone mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Covers Included:\u003c\/strong\u003e The R2's OBD-II port sits down in the footwell, where dirt, sand, and road grime collect. Built-in covers plug each USB port when it's not in use, keeping debris out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Housing:\u003c\/strong\u003e A solid aluminum alloy shell helps dissipate heat and holds up better than all-plastic chargers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTested by Us:\u003c\/strong\u003e We put it through the same real-world testing as everything we sell, in our own Rivians.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA Note on 25W Charging\u003c\/h3\u003e\n\u003cp\u003eFaster 25W wireless charging requires a 15-volt USB-C PD supply. We tested five OBD-II to USB chargers -- including every one our competitors sell -- and none of them provide it. If someone claims faster charging from an OBD-II port, be very, very skeptical.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cp\u003eCombine it with the TripleLock Phone Mount for R2 - Driver and a charging MagSafe holder for a complete, clean phone setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e** \u003cstrong\u003eNOTE: \u003c\/strong\u003eThis item is current in transit to us. We're expecting it to arrive any day, but we've placed the guaranteed delivery date as the ETA. Orders that include this will ship when it arrives. **\u003c\/p\u003e","brand":"OpenSourceEV","offers":[{"title":"Default Title","offer_id":53000606581016,"sku":"OBD2_Dual","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/9975\/2605\/files\/2224CDD8-C348-4F20-A033-B2CB72BC984C_1_201_a_05180a73-83d4-4da3-a69c-dce6385f32a5.jpg?v=1792780390"}],"url":"https:\/\/opensourceev.com\/collections\/rivian-r2.oembed?page=2","provider":"OpenSource EV Parts","version":"1.0","type":"link"}